| Easyfit Press Releases |
| (AUGUST 2009) – Easyfit, Inc., North Canton, Ohio introduces a new line of slip-on structural pipe fittings to build handrail systems that conform to the “barrier-free” requirements of the Americans with Disabilities Act (ADA) and other applicable state and local building codes. The new line of fittings is used to construct handrails that provide a smooth, contiguous gripping surface throughout the entire length of the installation. The new Easyfit ADA series is comprised of eight new fittings.
Get Complete Document in .pdf Format |
 |
|
New ADA fittings
August 2009
|
| (June 2009) – Two new “add-on” fittings from Easyfit, Inc., North Canton, Ohio allow for the modification and expansion of existing tubular pipe structures without having to dismantle the structure. Easyfit models EFA03G Short Tee and EFA04G Crossover fittings are available in two sizes each to fit 1-1/4” and 1-1/2” nominal pipe and are designed for building and modifying handrails, guard rails, displays, racks, shelves, tables, playground equipment, store fixtures, lighting grids, awnings, theatrical sets, carports, greenhouses, boat docks, safety barriers and other structures.
Get Complete Document in .pdf Format |
 |
|
New EFA04G Add-On Crossover fitting
June 2009
|
| (April 2009) – Easyfit, Inc., North Canton, Ohio announces the introduction of its “EasyRail” safety railing kits featuring pre-built uprights to reduce installation time and costs. The EasyRail safety barrier system is designed to be used around machinery and equipment as well as walkways and other areas where personnel access should be restricted because of safety concerns. EasyRail meets OSHA standards, and since each upright is pre-assembled, every railing set-up will be OSHA-compliant without measuring, according to Easyfit.
Get Complete Document in .pdf Format |
 |
|
New EasyRail Straight Kit
April 2009
|
| (March 2006) – Easyfit, Inc., North Canton, Ohio announces the introduction of its new EF45-GM slip-on structural pipe fitting. The new fitting serves as a variable angle inline connection, adjustable through 170 degrees. It is available to fit three standard pipe sizes, including Easyfit Size 25 (1-inch), Size 32 (1-1/4”), and Size 40 (1-1/2”), and used in combination with rigid fittings to build a variety of tubular pipe structures without costly welding or drilling, according to Easyfit.
Get Complete Document in .pdf Format |
 |
|
New EF45GM Inline Swivel
March 2006
|
| (October 2005) – Easyfit, Inc., North Canton, Ohio announces the introduction of its new EF42 slip-on structural pipe fitting. The new fitting provides a 90-degree crossover joint to build railings, racks, tables, frames, awnings, displays, store fixtures, carports, boat docks, playground equipment, safety barriers, theatrical sets, greenhouses, and other tubular pipe structures. The company also announced that it has moved from Beachwood, Ohio to a larger facility in North Canton, Ohio to accommodate growing business needs.
Get Complete Document in .pdf Format |
 |
|
New EF42 Clamping Cross Over
October 2005
|
| (July 2005) – Easyfit, Inc., Beachwood, Ohio announces the introduction of its new EF43G slip-on structural pipe fitting. The new fitting serves as a combination socket tee and crossover by joining horizontal rails to an upright, leaving the protruded socket to take a horizontal tie, perpendicular to the other rails, across the section. This makes it ideal for building shelved racks (with the horizontal pipe outside the upright), or pallet racks (horizontal pipe inside the upright). It is available to fit three standard pipe sizes, including Size 6 (1-inch), Size 7 (1-1/4”), and Size 8 (1-1/2”), according to Easyfit.
Get Complete Document in .pdf Format
|
 |
|
New EF43 Combination Socket
July 2005 |
|
|
Home Fittings Catalog Ordering Technical Contact Us
Easynews! Resources About Slip On Fittings Easyfit Gallery Press Room
Site Map
Copyright ©2004-2009 EasyFit, Inc. - All Rights Reserved
Easyfit™ Website Copyright and Terms of Use
|
